• img1
  • img2
  • img3

+86-571-64667230

claire0086@yahoo.com

Product Categories

Contact Us

Add:Yuzhao Machinery Industry Zone of Tonglu Zhejiang China

Business Tel: 86-571-64667178
86-571-64666798

Service Tel: 86-571-64667230

Fax: 86-571-64667131

Mobile: 8613567171079

E-mail: claire0086@yahoo.com

Hot Tags: Wire Drawing MachineAuxiliary EquipmentAuxiliary MachineSteel Wire Drawing MachineWire Drawing

Home > News > Content
Drawing Machine Cost-effective


The wire drawing machine is one of the main equipment of the metal wire rod processing and wire and cable industry. It mainly processes the metal wire into a variety of fine lines, which is usually composed of partial line, water cooling, cable collection and cable, and the electrical transmission part is mainly By the pay-off motor and take-off motor and cable motor to achieve. From the product specifications to distinguish between the drawing machine can be divided into a large pull machine, in the machine, a small pull machine, micro-machine; from the production process to distinguish can be divided into water tank type, pulley type, Wire Drawing Machine straight into the main and several.

The main performance characteristics of the drawing machine. The device compared with other wire drawing equipment, its main features can be summarized as five points,

The first point is that its reel with narrow water-cooled cooling method, Wire Drawing Machine and drawing die is a direct water-cooled, so the cooling effect is better;

The second point is that the device uses a strong narrow V-belt and a flat-level secondary enveloping worm gear drive, so that it is not only efficient when working, and almost no noise.

The third point is that the device specializes in the use of a high degree of security of the fully enclosed protection system, which makes the processed products to maintain good quality;

The fourth point is the drawing machine with gas tension tuning, Wire Drawing Machine making the entire drawing process is unstable and uniform, greatly enhance the quality of drawing wire;

The fifth point is a combination of more advanced AC frequency control technology, but also has a high degree of automation, for the user, the operation is also very convenient.

Should ensure that the cable machine downtime once a month maintenance, thorough maintenance and related maintenance work.

The first is the daily maintenance of the drawing machine: mainly to ensure the external health of the equipment; the supply of gas pipeline and joints to check; and the upper and lower shaft and lifting screw lubrication, you can use the grease gun to refuel; and air filtration The food in the water discharge; Wire Drawing Machine there is the balance of the belt to adjust and check.

Followed by the weekly maintenance of the drawing machine: the daily maintenance of residual sludge clean up, in accordance with the requirements of the maintenance of the wire drawing machine lubrication maintenance; there are tension belt tension; the last is the most abrasive belt tension to check , Wire Drawing Machine And the appropriate adjustments.

As the drawing machine is high-speed, strong cooling, cost-effective, non-bending, high efficiency and no twisting of the wire drawing machine, so in the metal products and other industries have a very wide range of use. Wire drawing machine and pulley wire drawing machine compared to the words, Wire Drawing Machine not only in the production of high efficiency, and the cost of production is also very low, the most important is the superior quality of the product, the hardening rate of steel after processing on the lower, With a high plasticity and toughness, so the intensity of the fluctuation range is very small.


Contact Us
Hangzhou Sanjin Machinery Manufacture Co.,Ltd

Address: Yuzhao Machinery Industry Zone of Tonglu Zhejiang China

Tel: +86-571-64667230

Fax: +86-571-64667131

E-mail: claire0086@yahoo.com

Copyright © Hangzhou Sanjin Machinery Manufacture Co.,Ltd All rights reserved.
foottop