• img1
  • img2
  • img3

+86-571-64667230

claire0086@yahoo.com

Product Categories

Contact Us

Add:Yuzhao Machinery Industry Zone of Tonglu Zhejiang China

Business Tel: 86-571-64667178
86-571-64666798

Service Tel: 86-571-64667230

Fax: 86-571-64667131

Mobile: 8613567171079

E-mail: claire0086@yahoo.com

Hot Tags: Wire Drawing MachineAuxiliary EquipmentAuxiliary MachineSteel Wire Drawing MachineWire Drawing

Home > News > Content
The Drawing Machine Is Mainly Used In Machinery Manufacturing

The drawing machine is also widely used in industrial applications, mainly used in machinery manufacturing, metal processing, petrochemical, plastics, bamboo products, wire and cable and other industries.

Drawing machine according to its use can be divided into metal wire drawing machine, plastic wire drawing machine, bamboo wire drawing machine. The metal wire drawing machine is mainly used for the pre-processing of metal products such as standard parts. The plastic wire drawing machine is mainly used in the plastic products industry to produce all kinds of hollow, solid circles with polyester, nylon, polyethylene, Wire Drawing Machine polypropylene and polyester chips. Silk or flat wire for deep processing of special equipment; bamboo wire drawing machine is mainly used for wood products industry in the production of chopsticks, toothpicks, barbecue sticks and other pull out bamboo wire, wood wire re-processing of special equipment.

It is particularly noteworthy that the metal wire drawing machine is a standard parts and other metal products production of pre-processing equipment, the purpose is to steel production by the manufacturer to the standard parts and other metal products manufacturing enterprises wire or bar through the drawing machine drawing , Wire Drawing Machine So that the diameter of wire or bar, roundness, internal metallographic structure, surface finish and straightening are to meet the standard parts and other metal products required for the production of raw materials processing requirements. Therefore, the wire drawing machine on the pretreatment of these products is directly related to the standard parts of metal products manufacturing enterprise product quality.

Before starting the drawing machine, the staff must first carry out a series of inspections, with particular attention to the oil level, the pressure of the equipment and the tightening and lubrication of the word wheel take-up machine, and should be adjusted in time. In addition, Wire Drawing Machine it should also check the wire drawing machine safety protection device is complete. If there is a problem, it should be dealt with in a timely manner.

When confirming that there is no problem with the drawing machine equipment, the staff member should also place the blank wire on the pay-off machine as required and then turn the lever valve handle so that the head is tightened. It should be noted that, before rolling the head, you should check whether the specifications match the mold. And then in accordance with the order one by one to wear the mold, Wire Drawing Machine and finally the wire should be introduced into the finished reel or the word wheel take-up machine.

And then commissioning the water valve so that the drawing machine equipment tank filled with soap, and then close the water valve. In addition, before starting the word wheel take-up machine, also need to check whether the air pressure is abnormal. In the case of confirmation under normal circumstances, Wire Drawing Machine can be installed after the word wheel, and then close the word wheel take-off machine safety door. And then adjust the electromagnetic speed knob to the low-speed position, and then slowly in its speed to normal operation.

In the process of drawing machine equipment, the staff need to pay attention to the operation of the equipment, if found to have leakage, oil spills, abnormal sound, the line is not flat and other issues, it should be timely parking check, with the problem can be resolved after the open Equipment to produce, and then also need to follow the above steps to operate.

The above content is for everyone to introduce the correct operation of the drawing machine equipment specific process, I believe that through this study, we have mastered the correct operation of the drawing machine equipment, hope that the user friends in the future to better use the device.


Contact Us
Hangzhou Sanjin Machinery Manufacture Co.,Ltd

Address: Yuzhao Machinery Industry Zone of Tonglu Zhejiang China

Tel: +86-571-64667230

Fax: +86-571-64667131

E-mail: claire0086@yahoo.com

Copyright © Hangzhou Sanjin Machinery Manufacture Co.,Ltd All rights reserved.
foottop